User`s guide

Handling Roll Media – User’s Guide
52
AP-75100, Rev.2.0, 26/11/04
4.3.1.2. Operation Panel
The operation panel is used to set operational conditions.
No. Name Function
A / Part of the operation panel controlling the unwinder 100.
B / Part of the operation panel controlling the winder 100.
1 Print Side Selector
In case you loaded media with printed side on the outside select
‘OUT’, otherwise select ‘IN’.
2 Unwinder 100 power ON Toggle between Manual and Automatic mode.
Manual
3 Unwinder 100 LED
Automatic
LED lights up when pushing one of the buttons
Motor turns: LED flashes.
Motor is off : LED is out.
Outside printing Inside printing
4 Backwards button Roll-off unwinder Roll-up unwinder
5 Forwards button Roll-up unwinder Roll-off unwinder
6 Winder 100 power ON Power ON or OFF the winder 100.
Manual
7 Winder 100 LED
Automatic
LED lights up when pushing one of the buttons
Motor turns: LED flashes
Motor is off : LED is out.
Outside printing Inside printing
8 Backwards button Roll-off winder Roll-off winder
9 Forwards button Roll-up winder Roll-up winder
10 Power LED Lightens up the system is powered ON.