User`s guide

Handling Roll Media – User’s Guide
38
AP-75100, Rev.2.0, 26/11/04
3.4.2. Turning the power ON / OFF
The methods to turn the power ON or OFF are described below.
2.4.2.1. Turning the power ON
Turn the power of the unit ON according to the following procedure.
Step 1 : Turn the power switch ON.
¾ The product turns the power ON.
¾ The SENSOR lamp will light.
1. Power switch
3.4.2.2. Turning the power OFF
Turn the power OFF according to the following procedure.
Step 1 : Make sure the product is not winding.
Step 2 : Turn the power switch OFF.
¾ The product turns the power OFF.
¾ The SENSOR lamp will turn off.
1. power switch