User`s guide

Handling Roll Media – User’s Guide
37
AP-75100, Rev.2.0, 26/11/04
3.4.1.2. Operation Panel
The operation panel is used to set operational conditions and to check / display the status of the product.
(1) Operation switches
No. Name Function
1 AUTO switch Used to automatically wind the roll media.
→ Forward : When the media sensor detects the media, the
scroller automatically rotates forward. The media is wound with
the printed side at the outside.
→ OFF : Used when operating the MANUAL switch.
→ Backward : When the media sensor detects the media, the
scroller automatically rotates backward. The media is wound with
the printed side at the inside.
2 MANUAL switch The winder system is manually operated.
→ Forward : The scroller rotates forward.
→ Backward : The scroller rotates backward.
(2) Status Lamp
No. Name Status Function
ON The product is ON.
Waiting
Flashing An error has occurred.
3 SENSOR lamp
OFF The product is winding the media.
The product is OFF.