User`s guide

Handling Roll Media – User’s Guide
36
AP-75100, Rev.2.0, 26/11/04
3.4. HANDLING ROLL MEDIA ON A WINDER 30
This chapter explains how to handle the product.
3.4.1. Part names and functions
Part names and functions are explained below.
3.4.1.1. Winder 30
No. Name Function
1 Winder 30 motorized unit Winds and collects the printed roll media.
2 Media sensor Detects the printed media.
3 Scroller receiver Loads the scroller for the winding unit.
4 Power switch Turn the product ON and OFF.
5 Operation Panel This panel is used to set operational conditions, and the status of
the product.