User`s guide

Handling Roll Media – User’s Guide
32
AP-75100, Rev.2.0, 26/11/04
3.2.3. Connecting the cables
The connection procedure for the power cable is explained below.
Notes :
• Refer to the following for important information on the connection of the power
cable. User’s Guide : Connecting the power cable.
• Use a cable that is suitable to the local power specifications when connecting the
power cable.
• If the power cable is damaged, contact one of the following :
o The shop where you bought the product
o Nearest MUTOH local dealer
Connect the power cable according to the following procedure.
Step 1 : Make sure that the printer is OFF.
1. Power switch
Step 2 : Plug the power cable to the AC inlet on the left side of the winder 30 motorized unit.
1. AC inlet 2. Power cable
Step 3 : Plug the cable correctly to the outlet.