User`s guide

Handling Roll Media – User’s Guide
21
AP-75100, Rev.2.0, 26/11/04
When moving the roll media to the right
¾ Rotate the scroller adjustment screw clockwisely.
1. Scroller adjustment screw 2. Scroller
3. Roll media 4. Media loading position
Step 9 : Press the [F4] key on the operation panel to lower the pressure rollers.
¾ The MEDIA SET lamp will turn off.
Step 10 : Close the front cover.
Caution :
• Be careful not to pinch your fingers when opening and closing the front cover.
Notes :
• If you load a new media roll, the media end may not be straight. If so, cut the end
of the roll media.
1. Front cover
Step 11 : The media initial menu is displayed on the operation panel.
* PaperInitialMenu *
Roll
← F2
F3 →
LeverUp User1
← F4
F2, F4 → ENTER or F3