User`s guide

Handling Roll Media – User’s Guide

AP-75100, Rev.2.0, 26/11/04

Step 3 : Insert the fixed flange into the roll media. Note that the media end is on the left side of the media

when viewed from the flange side.

1. Fixed flange 2. Roll media

Step 4 : Insert the flange until the right end meets the media tube of the roll media.

1. Fixed flange 2. Roll media

Step 5 : Attach the movable flange to the other end of the media to fix the media firmly.

1. Movable flange 2. Roll media

Step 6 : Tighten the screw of the movable flange to fix the roll media to the scroller.

1. Movable flange 2. Scroller