Technical information

TIB219_Rockhopper II_FW rh3.00 Page 8/11
2.2. Scan Width
This new feature appears as a new menu item in the “Print Mode” menu.
The aim of this feature is to provide better control over ink drying.
Setup items Parameters Description Drying time
DataWidth
Carriage moves only over the printing area Short
MediaWidth
Carriage moves to the end of the media Depending on MediaWidth
ScanWidth
FullWidth
Carriage moves over the full width of the
printer
Long
Notes
• This setting is indicated on the setup list.
• This setting works with HDD printing.
• This setting has no effect on internal test prints.