Technical information

TIB219_Rockhopper II_FW rh3.00 Page 7/11
Weaving method User Tip Print Modes Supported 2 pass 4 pass
2 pass 11 m²/h
720x720
4 pass 6 m²/h
Sign / Quality
Preferred setting for signage/poster
applications containing big areas
with solid colours or critical
gradients and for photo quality
output on coated media.
(small loss of speed in 2 pass
modes)
Default selection after firmware
installation
2 pass 13 m²/h
720x720
4 pass 6 m²/h*
Picture / Speed
Preferred setting for non-sign
images, pictures, continuous tone
data.
(no speed loss)
(*) 4-pass is a quality mode and will
always use a tuned sign weave
pattern, even if picture is selected
from the panel / RIP.
2 pass 13 m²/h
720x720
4 pass 6 m²/h*
Stitch
Creates a fine print swath overlap.
Mildly improves print quality versus
“Off” setting.
(lowest level of interweaving)
(*) 4 pass data will be printed as
classic
Classic
Use classic to maintain classic
printer behaviour in all print modes.
(prior to firmware version rh3.00)
All print modes
OFF
Switches off any kind of
overlap/weaving. Useful when trying
to inspect individual nozzle
behaviour or checking the step-
adjust.
All print modes