Technical information

TIB219_Rockhopper II_FW rh3.00 Page 5/11
2.1.2. Requirements
• 2x4 and 1x6 ink setup
The i²-feature is available for ‘2x4’ ink setups and ‘1x6’ ink setups.
Weaving sign and picture are only available in 720x720 printmodes.
When sending a file with an unsupported weave configuration, the stitch setting will be used.
Stitch mode is available in all 1pass and 2pass modes.
Stitch mode is unavailable in all 4pass modes.
2.1.3. Menu Changes
►
It is now possible to select more options than before. Namely the intelligent interweaving functions.
Setup items Parameters Description
Sign / Quality For Sign printing OR Quality Printing (*)
Weaving (1/2)
Picture / Speed For Picture printing OR Speed Printing (*)
Stitch In previous firmware called “Stitch A”
Classic In previous firmware called “Default”
Weaving (2/2)
OFF Switches off any of these settings (not advised to run production)
* When selecting the Sign or the Picture weave while using an unsupported printmode, Stitch will be used if
available.
Uses specifically designed and
optimized Sign or Weave pattern
Uses Stitch if available
YES
NO
Sign or Picture weave selected
720x720 dpi