Technical information

TIB219_Rockhopper II_FW rh3.00 Page 11/11
4.Diagnostic
4.1. Ecoprepare doesn’t continue after replacing cassette
During the inkload with cleaning in the ecoprepare sequence, there was a problem when removing and
replacing a cartridge.
When replacing more than 1 cart. at the same time, or one cartridge at a time from slot 1, 2, 5 or 6, the
printer would no longer accepted the cleaning cartridges. This has now been fixed.
4.2. Corrected output of printfiles with RTL offset.
Previously it was possible that files with RTL offset printed over the media edge, onto the print platform. This
will no longer happen.