Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.7. REPLACING THE CURSOR

4.7.1. Replacing the cutter holder, cutter spring, cutter cap, solenoid

assembly

and solenoid spring

(1) Replacing the cutter spring

Step 1 : Open the front cover.

Step 2 : Remove the cutter blade from the cutter holder.

Step 3 : Remove the cutter spring from the cutter holder.

1 = Cutter spring 2 = Cutter holder

Step 4 : Replace the cutter spring.

Step 5 : Reinstall all parts in the opposite order of the removal procedure.

(2) Replacing the cutter holder, cutter cap, solenoid assembly and solenoid spring

Notes :

¾ Remove following covers before replacing the cutter holder, cutter cap, solenoid

assembly, and solenoid spring.

 Side cover R: refer to "Removing side cover R"

 Side cover L: refer to "Removing side cover L"

 Front cover: refer to "Removing the front cover"

 Carriage cover: refer to "Removing the carriage cover"

 Y rail cover: refer to "Removing the Y rail cover"

 Head cover: refer to "Removing the head cover"