Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

Step 4 : Remove the 2 screws fixing the steel belt.

1 = Screws fixing the steel belt 2 = Steel belt

Step 5 : Replace the steel belt.

Notes :

¾ Be careful when handling the steel belt. The steel belt may be cut off when

accreting dust to it or creasing it.

Step 6 : Reinstall all parts in the opposite order of the removal procedure.

Step 7 : Perform steel belt tension adjustment according to "Steel belt tension adjustment".