Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.5.9. Replacing the flushing box assembly

Notes :

¾ Remove following covers before replacing the flushing box assembly.

 Side cover R: refer to "Removing side cover R"

 Side cover L: refer to "Removing side cover L"

 Front cover: refer to "Removing the front cover"

 Carriage cover: refer to "Removing the carriage cover"

 Y rail cover: refer to "Removing the Y rail cover"

Step 1 : Unlock the head.

Notes :

¾ Refer to ‘Head Lock Menu’

Step 2 : Move the carriage from the capping position to the left.

Step 3 : Remove the screw fixing the flushing box assembly.

1 = Flushing box assembly 2 = Screw (M3x8) fixing the flushing box assembly

Step 4 : Remove the tube from the flushing box assembly.

Step 5 : Replace the flushing box assembly.

Step 6 : Reinstall all parts in the opposite order of the removal procedure.

Step 7 : Adjust the head and flushing box assembly so that they do not come into contact.