Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.5.4. Replacing the PF deceleration belt

Notes :

¾ Remove following covers before replacing the parts in the PF motor assembly.

 Side cover R: refer to "Removing side cover R"

 Side cover L: refer to "Removing side cover L"

 Front cover: refer to "Removing the front cover"

 Carriage cover: refer to "Removing the carriage cover"

 Y rail cover: refer to "Removing the Y rail cover"

 Media guide F: refer to "Removing media guide F"

Step 1 : Follow the instructions in "Replacing the PF motor assembly" to remove the PF motor.

Step 2 : Follow the instructions in "Replacing the PF_ENC assembly and PF scale assembly" to remove

the PF_ENC assembly and the PF scale assembly.

Step 3 : Replace the PF deceleration belt.

1 = PF deceleration belt

Step 4 :

Reinstall all parts in the opposite order of the removal procedure.

Step 5 : Adjust the tension of the PF deceleration belt according to "PF deceleration belt tension

adjustment".