Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.4.3. Replacing the inlet assembly, inlet board assembly and lever foot

cable assembly

Step 1 : Follow the instructions in "Replacing the Mainboard assembly, HDD_Extension board assembly,

HEAD_DRV board assembly, PCI_Linux board assembly and cooling fan assembly" to remove

the Mainboard assembly.

Step 2 : Follow step 2 to 4 in "Replacing the power source board assembly" to remove the Mainboard

assembly.

Step 3 : Remove the connector between the inlet board assembly and the inlet assembly.

Step 4 : Remove the 4 screws fixing the inlet board assembly.

1 = Inlet board assembly 2 = Screws (M3x6) fixing the inlet board assembly

3 = Inlet assembly 4 = Screws (M3x6) fixing the inlet assembly and

lever foot SW cable assembly

5 = Screw (M4x8) fixing the inlet assembly 6 = Lever foot SW cable assembly

Step 5 : Replace the inlet board assembly.

Step 6 : Remove the 3 screws fixing the inlet assembly.

Step 7 : Replace the inlet assembly.

Step 8 : Remove the 3 screws fixing the lever foot SW cable assembly.

Step 9 : Replace the lever foot SW cable assembly.

Step 10 : Reinstall all parts in the opposite order of the removal procedure.