Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

Step 6 : Remove the 4 screws fixing the power source.

1 = Power source board assembly 2 = Screws (M4x8) fixing the power board assembly

3 = Hexagon nut fixing the power board assembly 4 = Power source

5 = Screws (M3x6) fixing the power source

Step 7 : Replace the power source.

Step 8 : Remove the 2 screws and 2 hexagon nuts fixing the power source board assembly.

Step 9 : Remove the power source board assembly.

Step 10 : Reinstall all parts in the opposite order of the removal procedure.

Notes :

¾ When installing the mainboard assembly, be careful not to pinch the foot SW cables

by the mainboard base.