Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.2.11. Removing the maintenance cover

Step 1 : Remove the I/H cover.

Step 2 : Remove side cover R.

Step 3 : Remove side cover L.

Step 4 : Remove the front cover.

Step 5 : Remove the carriage cover.

Caution :

Please note that this cover is only on a Rockhopper II (2 heaters) printer.

Step 6 : Remove the 6 screws fixing the maintenance cover.

Rockhopper II 2 heater Rockhopper II 4 heater

1 = Screws (M3x8) 1 = Screws (M3x8)

Step 7 : Remove the maintenance cover.

Step 8 : Replace the parts inside the printer.

Step 9 : Reinstall all parts in the opposite order of the removal procedure.