Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

Step 7 : Remove the screws from the front of front media guide.

Notes :

¾ Please note that the amount of screws is size dependent.

Rockhopper II 2 heater

1 = Screws on the front of front media guide

Rockhopper II 4 heater

1 = Screws on the front of front media guide

Step 8 : Standing before the unit move the front paper guide towards you.

Step 9 : Loosen the cables from their cable clamps.

Step 10 : Carefully loosen the connectors

Notes :

¾ Be sure not to damage the cables or connectors.

Step 11 : Remove the front paper guide.

Step 12 : Replace the parts inside the printer.

Step 13 : Reinstall all parts in the opposite order of the removal procedure.