Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.2.8. Removing front paper guide

Step 1 : Remove side cover L.

Step 2 : Remove side cover R.

Step 3 : Remove the front cover.

Step 4 : Remove the carriage cover.

Caution :

Please note that this cover is only on a Rockhopper II (2 heaters) printer.

Step 5 : Remove the Y rail cover.

Step 6 : Remove the screws from the top of front media guide.

Notes :

¾ Please note that the amount of screws is size dependent.

Rockhopper II 2 heater

1 = Screws on the top of front media guide

Rockhopper II 4 heater

1 = Screws on the top of front media guide