Specifications

Rockhopper II series printers – Maintenance Manual
49
AP-74065, Rev. 1.2, 27/09/04
Step 7 : Remove the 5 screws from the rear of the Y rail cover.
¾ If the machine is an 87-inch model, there are 8 screws on the rear Y rail cover.
1 = Screws (M4x8) on the rear of the Y rail cover
Step 8 : Remove the Y rail cover.
Step 9 : Replace the parts inside the printer.
Step 10 : Reinstall all parts in the opposite order of the removal procedure.