Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.2.6. Removing the panel unit assembly

Step 1 : Remove side cover R.

Step 2 : Remove the panel tape power cord.

Step 3 : Remove the 4 screws fixing the panel base.

1 = Panel unit assembly 2 = Screws (M3x6) fixing the panel unit assembly

3 = Tape wire

Step 4 : Remove the panel unit assembly.

Step 5 : Remove the 6 screws fixing the panel board assembly and the panel cover.

1 = Screws (M3x8) fixing the panel cover

Step 6 : Remove the panel cover.

Step 7 : Remove the 4 screws fixing the panel bracket and the panel board assembly.

1 = Screws (M3x8) fixing the panel board assembly

Step 8 : Replace the panel board assembly.

Step 9 : Reinstall all parts in the opposite order of the removal procedure.