Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

4.2.4. Removing the front cover

Step 1 : Open the front cover.

Step 2 : Remove the E ring on the left side.

Step 3 : Remove the 4 screws on the left and right cover spindles.

1 = E ring 2 = Screws (M3x8) on the left and right cover spindles

Step 4 : If the machine is a 50-inch model, remove cover spindle L, and then slide and remove the front

cover.

1 = Cover spindle L