Specifications

Rockhopper II series printers – Maintenance Manual

AP-74065, Rev. 1.2, 27/09/04

Step 4 : Remove the top of the side cover R.

Step 5 : Remove the 4 bolts from the front and back of the inner surface on the bottom of side cover R

and the front cover nut.

1 = Hexagon socket head cap screws (M4x16) 2 = Cover nut

Step 6 : Remove the 6 bolts from the front and back of the bottom surface on the bottom of the side cover

Step 7 : Remove the bottom of side cover R.

1 = Hexagon socket head cap screws (M5x18)

Step 8 : Replace the parts inside the printer.

Step 9 : Reinstall all parts in the opposite order of the removal procedure.