Specifications

Rockhopper II series printers – Maintenance Manual
286
AP-74065, Rev. 1.2, 27/09/04
(3) The print head
may be damaged.
•Replace the print
head assembly
→ Replacing the
print head
assembly and
head tape power
cable.
→ Counter
initialization menu
(4) The CR board
assembly may be
damaged.
• Replace the CR
board assembly
• Reset the head
error
→ Replacing the
CR board
assembly
→ Counter
initialization menu
(5) The Mainboard
assembly may
have a problem
• Replace the
Mainboard
assembly
• Reset the head
error
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ Counter
initialization menu
(1) Check the
HD_SLIDE sensor
via
“Sensor/HD_SLID
E” of the self-
diagnostic function
• Make sure that
the connections of
the HD_SLIDE
sensor assembly
connectors are
good.
• Mainboard : J127
→ Sensor Menu
(2) Make sure that
the connections of
the HD_SLIDE
sensor assembly
connectors are
good.
• Replace the
HD_SLIDE sensor
assembly.
→ Replacing the
SLIDE motor
assembly,
HD_SLIDE
sensor assembly
and slide motor
installation board.
(3) The SLIDE
motor assembly
may be damaged.
• Replace the
SLIDE motor
assembly.
→ Replacing the
SLIDE motor
assembly,
HD_SLIDE
sensor assembly
and slide motor
installation board.
12 E 076 Error
PG CR origin
The HD_SLIDE
home position
cannot be detected.
(4) The Mainboard
assembly may
have a problem.
• Replace the
Mainboard
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.