Specifications

Rockhopper II series printers – Maintenance Manual
264
AP-74065, Rev. 1.2, 27/09/04
Maintenance
components
Maintenance assembly Apply to the gear
and cam
components
Kanto Kasei Co.,
Ltd.
FLOIL G-MK-1
Combined gear Apply to the gear
components
Kanto Kasei Co.,
Ltd.
FLOIL G-MK-1
Deceleration gear Apply to the gear
components
Kanto Kasei Co.,
Ltd.
FLOIL G-MK-1
Idler gear Apply to the gear
components
Kanto Kasei Co.,
Ltd.
FLOIL G-MK-1
Pump
Components
Idler gear axis Apply between the
pump base and the
idler gear axis.
Kanto Kasei Co.,
Ltd.
FLOIL G-MK-1
Winding
components
Winding assembly (gear
components)
Apply to the gear
components
Kanto Kasei Co.,
Ltd.
FLOIL G-MK-1
PF Driving
Components
Set screw Apply the screw lock
to the coupling set
screw.
Three Bond Co.,
Ltd.
1401
CR Driving
Components
Adjusting screw of the CR
slave pulley
After adjusting the
steel belt, apply the
screw lock.
Three Bond Co.,
Ltd.
1401
Cursor
Components
Step-bore screw Screw lock applying
to the shoulder
screw that fastens
the cursor and head
mounting plate
Three Bond Co.,
Ltd.
1401
Maintenance
components
E ring Apply to each of the
E-rings (prevents
noise due to
vibration).
Three Bond Co.,
Ltd.
1401
Scroller
receptacle R
components
Set screw Apply the screw lock
to the adjusting
knob set screw.
Three Bond Co.,
Ltd.
1401
Others Screw Apply to the position
of the screw lock.
Three Bond Co.,
Ltd.
1401
PF Driving
Components
CR tape power cable Stick double-sided
tape to the CR tape
power cables
(locating).
Not specified
Head base
components
Head 2 tape wire Stick double-sided
tape to the head 2
tape power cables
(locating and
preventing
floatation).
Not specified
Pump
Components
Pump assembly Acetate tape is fixed
to the pump
assembly tube
(prevents dislodging
of tube).
Not specified
Others Locations where sharp
edges are likely to occur
Acetate tape is fixed
to tape electrical
wires and
harnesses, where
sharp edges are
likely to occur
(sharp edge
protection).
Not specified