Specifications

Rockhopper II series printers – Maintenance Manual
262
AP-74065, Rev. 1.2, 27/09/04
8.5. JIG AND TOOL LIST
This section provides lists of jigs and tools required for service operations.
8.5.1. Required Tools
(1) Tools for part replacement
No. Name Part code Remarks
1 Philips driver No.2 Generic product Shaft length should be 250 mm or more.
2 Philips driver No.2 Generic product Shaft length should be 50 mm or less.
3 Philips driver No.1 Generic product Generic product For head adjustment, shaft length
150 mm or more
4 Flat-head driver Generic product
5 Pliers Generic product
6 Tweezers Generic product
7 Hexagon wrench (1.5 mm to
6.0 mm)
Generic product For head adjustment, etc.
8 Box driver (5.5 mm) Generic product For exchanging the mainboard
9 Box driver (7.0 mm) Generic product For exchanging the power board
10 E ring holder (E-2.5) Generic product JIS E-2.5
IWATA DENKO Co., Ltd.
11 E ring holder (E-4) Generic product JIS E-5
IWATA DENKO Co., Ltd.
12 Head cleaning jig JD-30410 ¾ Exclusive rubber bush, including mini fitting
¾ 4 set required per a main unit
13 Rubber bush JD-42052 Expendable supplies (exchange per using 20 times)
14 Mini fitting JD-42053 /
Generic product
Maker: Iuchi Seieido Co., Ltd.
15 Cleaning liquid A29 JD-41844 18l
16 Bottle for cleaning liquid (500
ml)
JD-42054 /
Generic product
(2) Tools for adjustment
No. Name Part code Remarks
1 Personal computer Generic product Printer port mounted parts
2 Printer cable Generic product Amphenol 36P, male connector
3 Tension gauge Generic product For measuring 5,000g Max.
Reference maker: Oba Keiki Seisakusho
4 Tension gauge Generic product Max. capacity should be 200 to 500g.
Reference maker: Oba Keiki Seisakusho
5 Y-axis tension attachment JD-42050 For steel belt tension adjustment
¾ Gauge diameter: 4 mm (0.16in.) or less
6 Y-axis tension attachment 2 JD-42435 For steel belt tension adjustment
¾ Gauge diameter: 2 mm (0.08in.) or less
7 CR gap check jig JD-42177 For head height adjustment
8 Flash memory card Generic product Spec.:
4MB Flash Memory Card
Type-II (PCMCIARel.2.1/JEIDAVer.4.2)
5V unique driving spec.
9 Loupe (equivalent to 10x) Generic product Generic product For head precision adjustment
10 Block gauge (21 mm) Generic product Generic product For cover sensor adjustment
11 Hand glass Generic product Generic product For checking the cap trace
12 Double coated media Exclusive
specified media
For adjusting printing accuracy and sensor sensitivity
Maker: Mitsubishi inkjet media
Product number: IJ-MatteCort 143
Other similar media
RJ6-THCCPAPE 137 (MUTOH)
13 Straight scale (1000 mm) Generic product