Specifications

Rockhopper II series printers – Maintenance Manual
247
AP-74065, Rev. 1.2, 27/09/04
Step 6 : Insert in the waste fluid tubes from the pumps a piece of 15 cm tube (DF-43951).
1 = piece of tube (15 cm)
Step 7 : Stick the locking wire saddle onto side plate F.
Step 8 : Bundle the tubes and connectors together in the locking wire saddle.
Step 9 : Bundle the waste fluid tubes in the large waste fluid tube.
1 = large waste fluid tube
Step 10 : Bundle the remaining tubes, cables and connectors together in the manner shown in the figure
below.