Specifications

Rockhopper II series printers – Maintenance Manual
245
AP-74065, Rev. 1.2, 27/09/04
(2) For 87 inch spec
87” Rockhopper II 2 heater
Step 1 : Waste fluid tube E and an ink tube joining tube are added between fluid tube A and the pump 4
tube fitting that groups together the waste fluid side tubes.
Step 2 : Connect up the tubing for pump 1 as shown on the figure below.
1 = Tube connecting to waste fluid tube 2 = Tube connecting to cap a
3 = Tube connecting to cap d