Specifications

Rockhopper II series printers – Maintenance Manual
243
AP-74065, Rev. 1.2, 27/09/04
7.15.2. Pump tubing layout - Rockhopper 2 heater
(1) For 50 or 64 inch spec
50” or 64” Rockhopper II 2 heater
Step 1 : Connect the tubing in the manner shown in the figure below.
1 = Tube connecting to the waste fluid tube 2 = Tube connecting cap b
3 = Tube connecting to cap a
Step 2 : Use a linking tube to connect the new-part pump tube (DF-43951) to the tube connecting cap 2.
1 = Tube connecting to waste fluid side 2 = Tube connecting to cap c
3 = Tube connecting to cap d 4 = Newly-added pump tube (DF-43951, length = 40 mm)
5 = 2 tube for linking