Specifications

Rockhopper II series printers – Maintenance Manual
185
AP-74065, Rev. 1.2, 27/09/04
5.9. ENDURANCE RUNNING MENU
In this menu, you can perform endurance running on the printer heads.
The Endurance Running menu includes the following items.
Initialization item Description Refer to
CR Motor Performs carriage stroke. CR Motor Endurance Menu
PF motor Drives the PF motor. PF Motor Endurance Menu
Razor Blade Cuts media. Cutter Endurance menu
Head up/down Changes over the head height repeatedly. Head Up/Down Endurance
Menu
Head lock Tests head lock operation.
Performs wiper up/down operation via the selecting
menu.
Head Lock Endurance
menu
Pump Drives the positive/negative pressure pump motor. Pump Endurance menu
Lever motor Drives the lever motor. Sequential Printing
Endurance Menu
Nozzle print Prints out a printing by printer heads repeatedly. Sequential Printing
Endurance Menu
General endurance Performs endurance running on the CR, PF and
head up/down concurrently.
General Endurance Menu
Confirmation Check the number of endurance running cycles. Endurance Running Check
Menu
* Life *
F1 →
CR motor PF motor
← F2
F3 →
Cutter Head U/D
← F4
(1/3)
* Life *
F1 →
Head Lock Pump
← F2
F3 →
Lever Motor Nozzle
← F4
(2/3)
* Life *
F1 →
Total Life Check
← F2
(3/3)