Specifications

Rockhopper II series printers – Maintenance Manual
183
AP-74065, Rev. 1.2, 27/09/04
(6) Ink parameter
This updates the ink parameter. The setup items are as follows.
Set: Ink not filled
Reset: Ink filled
Notes :
¾ When "set" has been selected on the ink parameter update menu, the product
implements initial filling operations at the next start up.
* InkParameter *
Init. Fill Flag +
Set -
↓ ENTER
* InkParameter *
Update Parameter ? If the parameter is changed
↓ ENTER
* InkParameter *
Updating Parameter
(7) Ink ID mask
Update the ink ID mask parameters. The setup items are as follows.
¾ Set: Ink ID is always fixed. When a mask has been set, any cartridge inserted will be
handled as dye 4 colours fixed.
¾ Reset: Resets the ink ID mask. Cartridge recognition becomes available via smart chip.
* Ink ID mask *
Ink ID mask +
Set -
↓ ENTER
* Ink ID mask *
Update Parameter If parameter is updated
↓ ENTER
* Ink ID mask *
Updating Parameter