Specifications

Rockhopper II series printers – Maintenance Manual
177
AP-74065, Rev. 1.2, 27/09/04
5.8. PARAMETER MENU
In this menu, you can modify the set values of various adjustment items (adjustment parameter).
The Parameter menu includes the following items.
Initialization item Description Refer to
Initialize. Initializes the adjustment parameters. Parameter Initialization
Menu
Update Updates the adjustment parameters. Parameter Update Menu
* Parameter *
F1 →
Initialize Update
← F2
5.8.1. Parameter Initialization Menu
This menu initializes the adjustment parameters. The parameters that can be initialized in this menu are as
follows.
¾ Capping position
¾ Media feed distance
¾ Serial number
¾ Head history
¾ Wiper history
¾ Waste ink history
¾ CR motor history
¾ PF motor history
¾ Pumps
¾ Waste tank
¾ Initialization of all items
* Initialize *
F1 →
P. FeedLen serialNo.
← F2
F3 →
Head Wiper
← F4
(1/3)
*Initialize*
F1 →
CR Motor PF Motor
← F2
F3 →
Pump A Pump B
← F4
(2/3)
*Initialize*
F1 →
WasteInk All
← F2
(3/3)
↓ Select item (P. FeedLen.)
* P. FeedLen. *
Initialize OK ?
↓ ENTER
* P. FeedLen. *
Initialize Parameter