Specifications

Rockhopper II series printers – Maintenance Manual
158
AP-74065, Rev. 1.2, 27/09/04
Notes :
¾ When printing the pattern, the head identifications 1A, 1B etc, are not printed.
Analyse the pattern as shown below. Be sure to have five lines for each color.
8B 8A 7B 7A 6B 6A 5B 5A 4B 4A 2B 2A 1B 1A 3B 3A
Adjustable head slant Adjusted head slant
No. Part
1 Angle adjustment screw
Step 6 : Tighten the screw fixing the head stationary plate.
Repeat step 1 to 6 until the adjustment is correct for all heads.