Specifications

Rockhopper II series printers – Maintenance Manual
147
AP-74065, Rev. 1.2, 27/09/04
5.4.6. Fan Menu
This menu is used to check if the fan operates normally by turning it ON and OFF the fan.
As soon as you select this menu, the fan will be activated.
When you press the [CANCEL] key, the fan is off and the operation panel displays "Inspection: Fan".
* Fan *
[Cancel] End
5.4.7. History Menu
This menu is used to check the maintenance history and serious error history.
* Elec. *
F1 →
Maintenance Error
← F2
(1) Maintenance history
Maintenance history for the following parts is displayed.
¾ Waste liquid tank capacity (#)
¾ Number of cuts (#)
¾ Number of wipes of the cleaner head (#)
¾ Number of rubs of the cleaner head (#)
¾ Number of drives of the CR motor (#)
¾ Number of drives of the PF motor (#)
¾ Number of printing copies (#)
¾ Number of cleanings (#)
¾ Discharge amount of head ink 1 (A, B nozzles), M dot
¾ Discharge amount of head ink 2 (A, B nozzles), M dot
¾ Discharge amount of head ink 3 (A, B nozzles), M dot
¾ Discharge amount of head ink 4 (A, B nozzles), M dot
¾ Cutter solenoid down times (#)
Notes :
¾ For the CR motor drive count, 1 pass becomes 1 count.
¾ For the PF motor drive count, 10 meters travel becomes 1 count.
¾ For 87-inch specifications, the discharge amount of head ink 5 to 8 (A, B nozzles)
are added.
* Maintenance *
WasteInk 00000000 Waste liquid tank capacity
Cut 00000000 Number of cuts
(1/10)
* Maintenance *
Wiper 00000000 Number of wipes of the cleaner head
Rubbing 00000000 Number of rubs of the cleaner head
(2/10)
* Maintenance *
CR Motor 00000000 Number of drives of the CR motor
PF Motor 00000000 Number of drives of the PF motor
(3/10)