Specifications

Rockhopper II series printers – Maintenance Manual
128
AP-74065, Rev. 1.2, 27/09/04
4.11.2. Replacing the waste fluid bottle assembly (Rockhopper II 4H)
Notes :
¾ When replacing the waste fluid bottle assembly, be sure to perform following
operation to clear the counter. "High ink initialization" or " Cleaning initialization":
refer to "Counter Initialization Menu"
Step 1 : Remove the waste fluid bottle assembly.
Caution :
Waste ink will remain inside the tubes. Be careful that the ink is not spilled from the tube
onto the printer or items close to the printer.