Specifications

Rockhopper II series printers – Maintenance Manual
127
AP-74065, Rev. 1.2, 27/09/04
4.11. REPLACING SUPPORTS AND SCROLLER
4.11.1. Replacing the waste fluid bottle assembly (Rockhopper II 2H)
Notes :
¾ When replacing the waste fluid bottle assembly, be sure to perform following
operation to clear the counter. "High ink initialization" or " Cleaning initialization":
refer to "Counter Initialization Menu"
Step 1 : Remove the waste fluid tube from the waste fluid bottle assembly.
1 = Waste fluid tube 2 = Waste fluid bottle assembly
Step 2 : Replace the waste fluid bottle assembly.
Caution :
Waste ink will remain inside the tubes. Be careful that the ink is not spilled from the tube
onto the printer or items close to the printer.
Step 3 : Reinstall all parts in the opposite order of the removal procedure.