Specifications

Rockhopper II series printers – Maintenance Manual
120
AP-74065, Rev. 1.2, 27/09/04
4.9. REPLACING THE PUMP AREA
4.9.1. Replacing the pump assembly
Notes :
¾ Remove following covers before replacing the parts in the PF motor assembly.
 Side cover R: refer to "Removing side cover R"
 Side cover L: refer to "Removing side cover L"
 Front cover: refer to "Removing the front cover"
 Carriage cover: refer to "Removing the carriage cover"
 Y rail cover: refer to "Removing the Y rail cover"
 Maintenance cover: refer to "Removing the maintenance cover"
Step 1 : Remove the connector and tube from the pump assembly.
1 = tube connections
Notes :
¾ There is some remaining ink in the tubes. Be careful that the ink is not spilled from
the tube onto the printer or items close to the printer.