Specifications

Rockhopper II series printers – Maintenance Manual
119
AP-74065, Rev. 1.2, 27/09/04
4.8.4. Replacing the transmission photosensor (wiper home position
and
maintenance home position)
Step 1 : Remove the transmission photosensor from the side plate R.
1 = Transmission photosensor (wiper origin side) 2 = Transmission photosensor (maintenance origin
side)
3 = Wiper origin cable assembly 4 = Maintenance origin cable assembly
5 = Side plate R
Step 2 : Remove each origin cable assembly from the transmission photosensor.
Step 3 : Remove the transmission photosensor.
Step 4 : Apply the screw lock to the tab portions of the transmission photosensors to be installed.
Step 5 : Reinstall all parts in the opposite order of the removal procedure.
Notes :
¾ When installing the origin cable assembly onto the transmission photosensor, be
careful to not confuse the connectors.
 Wiper origin cable assembly (black): front
 Maintenance origin cable assembly (white): rear