Specifications

Rockhopper II series printers – Maintenance Manual
114
AP-74065, Rev. 1.2, 27/09/04
o 50 or 64 inch model: Cap (a) and Pump (1), Cap (b) and Pump (3), Cap (c) and
Pump (2), Cap (d) and Pump (4)
o 87 inch model 2 heater: Cap (a) and Pump (1), Cap (b) and Pump (3), Cap (c) and
Pump (4), Cap (d) and Pump (2), Cap (e) and Pump (7), Cap (f) and Pump (5), Cap
(g) and Pump (6), Cap (h) and Pump (8)
o 87 inch model 4 heater: Cap (a) and Pump (1), Cap (b) and Pump (3), Cap (c) and
Pump (4), Cap (d) and Pump (2), Cap (e) and Pump (5), Cap (f) and Pump (7), Cap
(g) and Pump (8), Cap (h) and Pump (6)
50” or 64” Rockhopper II 2 heater 87” Rockhopper II 2 heater
50” or 64” Rockhopper II 4 heater 87” Rockhopper II 4 heater
Step 11 : Move the cursor to the opposite side of the origin.
Step 12 : Cap once.
Step 13 : Use a mirror to check that the cap does not impinge on the nozzle.
1 = Print head (nozzle face) 2 = Nozzle
3 = Cap trace 4 = Mirror
Step 14 : Reinstall all parts in the opposite order of the removal procedure.