Specifications

Rockhopper II series printers – Maintenance Manual
106
AP-74065, Rev. 1.2, 27/09/04
Notes :
¾ Make sure that the black tape connects properly.
¾ Please make sure that there are no air bubbles under the black tape. Air bubbles
below the black tape could cause the black tape to come loose.
Step 4: There are grooves between the different print platform plates. Cut the black strip at this place
equal with this groove.
1 = groove
Important :
¾ Make sure not to cut the heater strip below the print platform. Doing so will
damage the printer.