User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
94 AP-75198– Rev. 1.2
6 .5.2.2 C ondition m enu
Select printing quality with consideration to applications of printing data and printing speed.
Setup items Parameters Description
Condition (1/5)
360 × 360 dpi
The display changes to interlace setup items after the print
quality items settings have been finished.
720 × 360 dpi
360 × 720 dpi
Diagonal 720 dpi
Condition (2/5) 540 x 720 dpi
720 × 720 dpi
1080 × 1080 dpi
1440 × 720 dpi
Condition (3/5) 720 × 1440 dpi
Diagonal 1440 dpi
1440 × 1440 dpi
2160 × 1080 dpi
Condition (4/5) 1080 × 2160 dpi
Diagonal 2160 dpi
2880 × 1440 dpi
1440 × 2880 dpi
Condition (5/5) Diagonal 2880 dpi
Condition (1/5  5/5) - [CANCEL] key: To shift to the previous hierarchy menu.
6 .5.2.3 InterLa ceSetup m enu
To set the over printing method (interlace method) for printing.
Setup items Parameters Description
Interlace method
1 pass
Over printing is not performed.
1 pass Few Only gaps between lines are overwritten.
2 pass Over-printing is performed twice per 1 line.
4 pass Over-printing is performed four times per 1 line.
- [CANCEL] key: To shift to the previous hierarchy menu.