User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
90 AP-75198– Rev. 1.2
6 .5.1.16 D ista ncea djustm entm enu
To perform various settings for media feed compensation
Notes
For details of the distance adjustment, refer to "Distance adjustment".
Setup items Parameters Description
Dist.Adj Print1 Performs printing by media feed compensation.
A correction pattern with a width of ± 0.20% (in steps of 0.10 %) is printed
around the centre of the correction value currently set.
Change Changes the media feed compensation value.
The menu changes to the Change Media Feed Correction Value menu.
Print2 Performs printing by media feed compensation (for fine adjustment).
A correction pattern with a width of ± 0.02% (in steps of 0.01%) is printed
around the centre of the correction value currently set.
- [CANCEL] key: Shifts to the previous hierarchy menu.
6 .5.1.17 C h a ng em enu
Change the distance adjustment value.
Setup items Parameters Description
Change 90.00%-<100.00%>-110.00% Changes the media feed compensation value by
operating the following keys.
 [F2] key: to increase the setup value.
 [F4] key: to decrease the setup value.
 [ENTER] key: to confirm the setup value
 [CANCEL] key: to cancel the setup value
6 .5.1.18 D ista ncea djustm entm enu
Performs printing by distance adjustment.
Setup items Parameters Description
Dist.Adj Data printing Now printing by media feed compensation. Wait for a
while until printing has been finished.
-  [CANCEL] key: to perform following operations :
 Media feed correction printing has been finished.
 To eject media.
 To shift to the previous hierarchy menu.