User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
86 AP-75198– Rev. 1.2
6 .5.1.6 Userm edia m enu
Make various settings on user defined media.
In the User media menu, for each setup value of following printing operation, eight settings of "user media 1-
8" can be set.
Notes
When media other than the recommended media are used (user media), the following problems may occur:
Media detection error
Oblique, torn, and creased media
Media jams
Decrease in print quality due to blurring, missing, or smudging of ink
End detection error of roll media
Problems caused by using media other than the recommended will void the warranty.
For more information, contact your local MUTOH dealer.
Setup items Parameters Description
User media 1-8 (1/3) InkDryTime In order to let the ink for the printing dry, the time between the end
of the print and the beginning of the next print is set.
HeadHeight Sets the distance (head height) between the print head and the
media.
Stiffness Makes the setting on the stiffness of the media to be used.
Thickness Makes the setting on the thickness of the media to be used.
User media 1-8 (2/3) Heater Sets the temperature of the Heater.
Drier Sets the temperature of the Drier.
Fixer Sets the temperature of the Fixer.
PostFixer Sets the temperature of the Post Fixer.
User media 1-8 (3/3) HStatus Checks the temperature of heating elements.
Dist.Adj Performs various settings for media feed compensation.
Type (1/3-3/3) - [CANCEL] key: to shift to the previous hierarchy menu.