User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
78 AP-75198– Rev. 1.2
6 .3.2.4 M enu a nd
During printing, extra information about the current job is available. Use the menu UP and DOWN keys to
browse through these menus.
1) Menu 1/4
Standard menu during printing. It is only possible to cancel a print in this menu!
2) Menu 2/4 and 3/4
Tw o situa tionsa repossible:
Length information is not provided with the job. The printer cannot know progress and remaining time.
However, size of the already printed area is shown.
Length information is provided; the printer calculates progress and remaining time. The correctness of
this depends on the correctness of the provided information.
4) Menu 4/4
This menu displays the important print parameters provided by the RIP software.