User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
71 AP-75198– Rev. 1.2
6.1.3 Changing between the screens
To change the printer status, follow the steps below.
6 .1.3.1 F rom m a in screen to m enu screen
Press either or on the operation panel when the printer is in the main screen to go to menu
screen 1/7  7/7
6 .1.3.2 F rom m enu screen to m a in screen
To switch from a menu screen to the main screen, following actions can be taken:
Press the [CANCEL] key on the operation panel.
Leave the printer for 3 minutes when the status is in the setting menu display.
or
or leave the printer idle for 3 minutes