User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
70 AP-75198– Rev. 1.2
6.1 HOW TO WORK IN THE MENU
Please find below all necessary information on how to switch, select and cancel menu items.
6.1.1 Main screen
When powering ON the printer, it will (when no errors occur) start up in its main screen. The function of each
key is explained below
1
2 3
4 5
6 7
N° Position Description Example
1
1st line Displays the current status of the printer. Ready to print
2
Left of 2nd line Displays the function assigned to [F1] key Cut&Feed
3 Right of 2nd line Displays the function assigned to [F2] key Cleaning
4 Left of 3rd line Displays the function assigned to [F3] key Heaters
5 Right of 3rd line Displays the function assigned to [F4] key Lever Up
6
Left of 4th line Displays the currently set media type User 1  8
7
Right of 4th line Displays the approximate amount of remaining media in meter.
However, the amount is displayed only when either "Roll media
1", "Roll media 2", or "Roll media 3" is selected in the Roll media
setting menu.
30 m
6.1.2 Menu screen
In the SetupMenu, changes can be made to the printer settings.
The content displayed on the LCD monitor of the operation panel is as follows:
1
2 3
4 5
6
N° Position Description Example
1
1st line Displays the setting menu name currently set. SetupMenu
2
Left of 2nd line Displays the function assigned to [F1] key. InkStatus
3
Right of 2nd line Displays the function assigned to [F2] key. OriginSet
4 Left of 3rd line Displays the function assigned to [F3] key. TestPrint
5 Right of 3rd line Displays the function assigned to [F4] key. MediaSet
6 4th line Displays the currently available functions of the [F1] key to the
[F4] key or displays the page status if there are multiple pages
for the currently displayed setting menu.
1/7