User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 6 : PRINTER MENU
67 AP-75198– Rev. 1.2
6 PRINTER MENU
6.1 How to work in the menu .........................................................................................70
6.1.1 Main screen.........................................................................................................70
6.1.2 Menu screen........................................................................................................70
6.1.3 Changing between the screens ...........................................................................71
6.1.3.1 From main screen to menu screen.................................................................71
6.1.3.2 From menu screen to main screen.................................................................71
6.2 Operation panel IN standby mode...........................................................................72
6.2.1 [F1]  Feeding, Cutting media and Step Adjust ...................................................72
6.2.2 [F2] - Cleaning the heads ....................................................................................73
6.2.3 [F3] - Controlling the heater elements .................................................................73
6.2.3.1 Change the heater temperature .....................................................................74
6.2.3.2 Change the fixer temperature.........................................................................74
6.2.3.3 Change the post fixer temperature .................................................................74
6.2.3.4 Change the dryer temperature .......................................................................74
6.2.3.5 Activate/ deactivate heaters. ..........................................................................75
6.2.4 [F4] - Operating the pressure rollers....................................................................75
6.2.5 [ENTER] - Print mode check ...............................................................................75
6.3 Operation panel during printing..............................................................................76
6.3.1 When heaters are not ready ................................................................................76
6.3.2 When heaters are ready ......................................................................................76
6.3.2.1 [F1] - On the fly step adjustments...................................................................76
6.3.2.2 [F2] - Cleaning................................................................................................77
6.3.2.3 [F3] - Adjust heaters .......................................................................................77
6.3.2.4 Menu and ..............................................................................................78
6.4 Operation panel after printing .................................................................................79
6.4.1 Cut off media with the printer knife ......................................................................79
6.4.2 Manually cut off media.........................................................................................80