User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 5 : PREPARATIONS BEFORE PRINTING
55 AP-75198– Rev. 1.2
5.2 TESTPRINTING
Follow the steps below to do a test print and confirm if your printer operates correctly.
Step 1 : Power ON the printer and load media.
Step 2 : Make sure that your printer is in the main screen.
Step 3 : Press either the [MENU ] key or [MENU ] key on the operation panel.
The setup menu is displayed.
Step 4 : Press the [F3] key on the operation panel.
"TestPrint: SetupPrint" is displayed on the LCD.
Step 5 : Select an item and press the appropriate key.
Setup items Parameters Description
Test print (1/2) SetupPrint Performs setup printing.
NozzleCheck Performs nozzle check printing.
Alignment (UniDir) Performs accuracy adjustment printing in one direction.
Alignment (BiDir) Performs accuracy adjustment printing in two directions.
Test print (2/2) Palette printing Performs palette printing.
Maintenance status Maintenance status printing is performed.
Distance Adj. Check Print distance adjustment check pattern
Test print (1/2-2/2) - [CANCEL] key: shift to the previous hierarchy menu.
Step 6 : Print the information on the selected item.
Step 7 : After printing, the printer returns to the main screen.