User`s guide

User’s Guide Rockhopper 3 Extreme
CHAPTER 4 : PERIODICAL MAINTENANCE
49 AP-75198– Rev. 1.2
4.2 DONE BY AUTHORISED MUTOH TECHNICIAN
An Authorized Mutoh technician should check and replace some components of your printer on frequent
base (every 6 and 12 months).
Be sure to remind your distributor when the replacements should be done.
It is very important not to skip a maintenance intervention in order to maintain constant print quality and to
keep your warranty.
Please refer to the table below to know what the Authorized Mutoh technician should do.
N° Action Frequency
1 Changing the dampers
Every 6 months
2 Changing the spitting box + tube + L connection
3 Applying grease on the head up-down cams when needed
4 Applying grease on the Y-motor belt if needed
5 Applying grease on the roller path carriage if needed
6 Applying grease on the capping station cam and gears if needed
7 Removing dust in the fan area underneath the print platform
8 Changing the pumps
Every 12 months9 Changing the tubes from the pumps to the waste bottle
10 Changing the maintenance station
Notes
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
Please refer to the latest spare part price list for the part numbers of the maintenance kits.